ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 (#E21296)

Description

2005-2013 C6 Corvette Convertible Faux Roll Bar Hoops - Pair

Dress up your 2005-2013 convertible Corvette C6 with our faux Roll Bars. Easy to install, NO drilling required for installation. Adds a unique, race inspired style and look to your C6 Corvette convertible.

*Note: This product is cosmetic only! It is not intended to offer protection in the event of a rollover*

Features:

100% 304 Stainless Steel.
High Polished, mirror finish.
Will not tarnish, fade or rust.
Easy "peel and stick" installation takes just minutes, NO drilling required.
Adds a unique look and style to your car.
Sold as a (2) piece set.
Made in USA!

Fits: 2005 2006 2007 2008 2009 2010 2011 2012 2013 Corvette Convertibles


Installation Instructions:

1. The first step for a successful installation is the preparation of the painted area to be mounted. This is VERY critical for the long term installation of these parts. To begin you must thoroughly scrub clean the areas to be mounted with a wax and silicone remover or any other professional adhesive remover of surface prepping agent. We recommend 3m adhesive remover found in most auto parts stores. If these agents are not available you can proceed with rubbing alcohol but it will be absolutely necessary to rescrub the area several same to insure the paint has been stripped of any and all surface treatment such as wax, paint sealants and any other such type of surface protections.

2. Once you have thoroughly stripped the surface, give it a little test to see if masking tape will stick to it. If not, clean it some more. Once the tape sticks properly, swipe the two areas ONCE with the adhesive promoter packet provided with your hoops. PLEASE NOTE that this promoter is NOT a cleaning agent and must not be used to clean the painted surface. It is a mounting agent that MUST be use to insure a good long lasting bond. Simple swipe the areas to be mounted once and ONLY once. This will create a nice bondable surface.

3. Before you permanently mount the hoops set each one in place just behind the seat head rests so they are centered and sit just in front of the deck lids roll. A properly set hoop will measure 7'' from center of one leg to the black roof gasket and 7- 7/8'' of the other. SEE PICTURE: Once you have the hoop nicely in place mark the location using a pencil marking the very edge of the hoop to the paint and also the center of the hoop to the paint as well as the center to the hoop itself. With these marks in place you should be able to remove the hoop and reposition it in exactly the same spot. Now that you have your locations marked simply peel the red release liner from the bottom of the hoops and then set the hoop back in place lining it up with your marks. With the hoop perfectly in place firmly press directly downward to set the hoop to the paint. Press firmly and maintain the pressure for a couple of minutes. This will cause the adhesive to set to the paint. Repeat the same process for the opposite side. DO NOT GET WET FOR 24 HOURS.

4. You have been provided with two egg shaped pads. These pads are to be mounted directly to the glass just behind the hoops to insulate the glass from the hoops during opening and closing especially for the power top convertibles. The normal function of the power top has a tendency to purge the glass forward towards the hoops during its operation. Although the hoops do not set against the glass the pads must be placed in position to prevent any possibility of

damage. To install simply close the top, set the pads at the top of the touch point with the bulk of the pad facing downward. This placement will insure that the pad protects the glass during its entire range of movement.

Return Policy:

If shipping damage occurs, the shipper and EC Products must be notified within 24 hours of delivery.

EC Products stands behind our products 100%. damage during installation is not the responsibility of EC Products and does NOT warrant a free replacement. Feel free to call or e-mail us with any questions, 800-488-5209 or orders@ecproducts.com.

All returns require pre-authorization before refunds, exchanges or credits will be processed.

Returns will be accepted up to 30 days from order date, with approval only. A standard 15% restock fee will be deducted from refund amount.

The customer is responsible for ALL shipping charges incurred in the process of placing the order and returning any part of the order. Returned packages must be sent prepaid, COD packages will be refused and returned at customer's expense. It is recommended that all returns be insured and shipped with a carrier providing a method of tracking in the event the shipment is lost or damaged.

Custom made items are NOT returnable.

[ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 [ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 [ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 [ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 [ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13 [ click image to enlarge ] E21296 ROLL BARS-FAUX HOOPS-CONVERTIBLE-PAIR-05-13
Pricing Price: $530.89 You Save: $58.99! Sale Price: $471.90

Qty:

Related Products

Roll Bars-Faux Hoops-Stainless Steel-Convertible-2PC-98-04
Make: Chevrolet
Model: Corvette
Item No: E21425
Years: 1998 - 2004
List Price: $530.89Discount Price: $442.41 (Savings: $88.48) 1998 - 2004 - C5 Corvette Convertible Stainless Steel Roll Bars - Faux Hoops - 2 Pieces